DA1863 - 125 amp Traction Control Battery Control Unt

Diagnostics, Reprogramming, ABS Brake Bleeding

 

BSU2-125B provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery. BSU2-125B can be used with any 12V automotive battery including AGM and GEL. When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain. Designed for use in the workshop and compatible with most diagnostic trolleys. Reverse polarity protection. Output current display. Supplied with 5M IEC power lead and 5M output leads.

> BSU2-125B provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state.
> During diagnostic or programming operations, the vehicle's systems are operating solely from the battery. Maintaining battery charge during this process is critical.
> The status of BSU2-125B is indicated simply by three LED's POWER, POLARITY, DEMAND. When all 3 are illuminated, BSU2-125B is supporting the battery.
> Designed to be wall, ramp or trolley mounted the BSU2-125B has been designed to meet the needs of the high power consuming vehicle.
> Approved by Jaguar & Land Rover.

Input - 90 - 260VAC
Output - 13.4V up to 125A continuous
Size - 300 x 184 x 124mm
Weight - 8kg