PDC141 - Rear Bumper Parking Sensor Conversion Kit for Range Rover Sport Front Bumper - Perfect if doing 2010 Conversion for Sport

These are the parking sensors you need if you are upgrading your Sport 2005 -09 model to a 2010 rear bumper.

The cut outs in the 2010 on rear bumpers are much smaller and you cannot reuse you old sensors ( see pictures )

You will also need to buy a new rear loom as the sensors have different connectors to the old sensors. - see our other items.

These should work with the older cars ( 2005 -2009 ) as long as you have the correct loom. They are compatible with the early car PDC control module etc.

We have found that in the majority of 05 -09 vehicles these work without a problem, however occasionally they do not work as a retro fit, possibly due to tolerance issues. In these cases you can return the parts for a refund.

Please note this sensor comes complete with a new silicone fitting washer ( LR P/N LR015497 ) that is not normally supplied with the PDC.

This listing is for 4 sensors - you will need 4 for the rear bumper.

These are finished in the standard black plastic finish - you can opt to leave them in this finish or get them colour coded.

The hole in the bumper using this late type PDC senor is approximately 17mm diameter

The hole in the bumper using the early type PDC sensor is approximately 22mm diameter